ALKAMIX™ MB6007

牌号ALKAMIX™ MB6007
厂家Qenos Pty Ltd
分类LLDPE
介绍ALKAMIX MB6007 is a slip masterbatch formulated with Oleamide at a concentration of 1.1 percent.

ALKAMIX MB6007 can be added to polyethylene during extrusion to reduce the coefficient of friction. The level required will vary according to coefficient of friction desired; gauge of film and other factors such as the presence of other additives (including antiblocks, colourants / pigments, etc...).

The maximum level of addition of MB6007 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 15 percent, when added to a polyethylene formulation free of any slip additives.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Qenos Pty Ltd 产品展示 种类
Alkatuff® 401 LLDPE
Alkatuff® 501 LLDPE
Alkathene® WNC199 LLDPE
Alkathene® WSM168 LLDPE
ALKAMIX™ MB6007 LLDPE
Alkathene® LDN248 LLDPE
Alkatuff® LL711UV LLDPE
Alkathene® LD0128MS LLDPE
ALKAMIX™ UHSMB LLDPE
ALKAMIX™ MB6005 LLDPE

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved