ATI Nickel ATI 200™

牌号ATI Nickel ATI 200™
厂家Allegheny Technologies Incorporated
分类Nickel
介绍ATI 200 alloy (UNS Designation N02200) and ATI 201 alloy (UNS Designation N02201) are wrought commercially pure nickel. The alloys differ only in the maximum carbon level allowed by specification, 0.15 percent maximum for ATI 200 alloy and 0.02 percent maximum for ATI 201 alloy. Either alloy provides highly ductile mechanical properties across a wide temperature range. Either alloy provides corrosion resistance in neutral to moderately reducing environments. In the annealed condition, either alloy possesses the approximate strength of mild steel. As-rolled material is sometimes furnished to provide higher strength levels.

The nickel alloys are readily fabricated by standard fabrication practices. The materials are covered by a variety of specifications and are assigned maximum allowable stresses in the ASME Boiler and Pressure Vessel Code.

The ATI 200 and ATI 201 alloys provide high thermal and electrical conductivity in comparison to nickel base alloys, stainless and low alloy steels. The ATI 200 and ATI 201 alloys are ferromagnetic.

Because long-time exposures of ATI 200 alloy in the 800 to 1200°F (427 to 649°C) range result in precipitation of a carbon containing phase and loss of ductility, the ATI 200 alloy is not recommended for service above 600°F (316°C). In applications above 600°F (316°C), however, the low carbon ATI 201 alloy may be considered. As proposed service temperatures approach 800°F, (427°C), resistance to creep should be considered a design criterion.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Allegheny Technologies Incorporated 产品展示 种类
ATI Nickel ATI 718Plus® Nickel
ATI Nickel Moly Permalloy Nickel
ATI Nickel ATI Nitinol™ Alloy Nickel
ATI Nickel ATI 718-OP® Nickel
ATI Nickel ATI 825™ Nickel
ATI Nickel ATI 520™ Nickel
ATI Nickel ATI 625™ (Sheet & Plate) Nickel
ATI Nickel ATI 718 HS™ & DA™ Nickel
ATI Nickel ATI 400™ Nickel
ATI Nickel ATI HX™ Nickel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved