ATI Nickel ATI 625HP™

牌号ATI Nickel ATI 625HP™
厂家Allegheny Technologies Incorporated
分类Nickel
介绍ATI 625HP™ alloy (UNS N06626) is an austenitic nickel-base superalloy possessing exceptional fatigue resistance. ATI 625HP™ alloy was developed especially for bellows applications. It also has excellent resistance to oxidation and corrosion over a broad range of conditions, including jet engine environments and in many other aerospace and chemical process applications. The alloy has outstanding strength and toughness at temperatures ranging from cryogenic temperatures to 2000°F (1093°C).

The ATI 625HP™ alloy is a restricted composition, vacuum melted variant of the widely known alloy 625 (UNS N06625) material. It derives its strength from the solid solution strengthening effects of molybdenum and columbium on the nickel-chromium matrix. These elements also contribute to the alloy's outstanding corrosion resistance. Although the alloy was developed for high temperature strength, it also provides a high level of general corrosion resistance to a wide range of oxidizing and non-oxidizing environments. The levels of chromium and molybdenum provide excellent resistance to chloride ion pitting and the high level of nickel provides resistance to chloride stress corrosion cracking. The material possesses a high degree of formability and shows better weldability than many of the other highly alloyed nickel-base alloys. The alloy is resistant to intergranular corrosion even in the welded condition.

ATI 625HP™ alloy is produced by a two-step melting process that includes a consumable electrode remelting procedure. At least one of these steps is performed in vacuum.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Allegheny Technologies Incorporated 产品展示 种类
ATI Nickel ATI 718™ (Sheet, Plate & Strip) Nickel
ATI Nickel ATI Rene 41® Nickel
ATI Nickel ATI 718 (Bar & Billet) Nickel
ATI Nickel ATI 690™ Alloy TREX Nickel
ATI Nickel ATI N-90™ Nickel
ATI Nickel ATI HB-2™ Nickel
ATI Nickel ATI X-750™ Nickel
ATI Nickel ATI 625™ (Bar & Billet) Nickel
ATI Nickel ATI Astroloy™ Nickel
ATI Nickel ATI 825™ Nickel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved