ATI Steel ATI 15-5™

牌号ATI Steel ATI 15-5™
厂家Allegheny Technologies Incorporated
分类Steel
介绍ATI 15-5™ precipitation hardening stainless steel (S15500) is a variant of the older ATI 17-4™ (S17400) chromium-nickel-copper precipitation hardening stainless steel. Both alloys exhibit high strength and moderate corrosion resistance. High strength is maintained to approximately 600°F (316°C). This alloy is designated Grade or Type XM-12 in several specifications.

The ATI 15-5™ alloy was designed to have greater toughness than S17400, especially in the through-thickness (short transverse) direction. This improved toughness is achieved by reduced delta ferrite content and control of inclusion size and shape. The composition and processing of ATI 15-5™ alloy is carefully controlled to minimize its content of delta ferrite, which is present in the S17400 material. Inclusion control is done by consumable electrode remelting using the electro-slag remelting (ESR) process.

The S15500 alloy is martensitic in structure in the annealed condition and is further strengthened by a relatively low temperature heat treatment, which precipitates a copper containing phase in the alloy. Like the S17400 alloy, the S15500 alloy requires only a simple heat treatment; a one-step process conducted at a temperature in the range 900°F (482°C) to 1150°F (621°C) depending on the combination of strength and toughness desired.

A wide range of properties can be produced by this one-step heat treatment. Heat treatment in the 900°F (482°C) range produces the highest strength, although it is slightly less than those of semi-austenitic alloys like S17700 or S15700. The latter precipitation hardening stainless steels generally require more steps to complete heat treatment. The ATI 15-5™ alloy is generally better suited for plate applications than are the semiaustenitic alloys.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Allegheny Technologies Incorporated 产品展示 种类
ATI Steel ATI 347™ Steel
ATI Steel ATI 13-8 (Bar & Billet) Steel
ATI Steel ATI 800H™ Steel
ATI Steel MINIMISER® 304 Steel
ATI Steel ATI 201LN™ Steel
ATI Steel ATI 409HP™ (UNS S40920) Steel
ATI Steel ATI 201L HP™ Steel
ATI Steel ATI C-200™ Steel
ATI Steel ATI 301™ Steel
ATI Steel ATI 20-25+Nb™ Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved