ATI Steel ATI 201LN™

牌号ATI Steel ATI 201LN™
厂家Allegheny Technologies Incorporated
分类Steel
介绍Materials for use at sub-zero temperatures should be ductile, tough and strong at their use temperature. Only a limited number of materials, among them most of the austenitic stainless steels, satisfy all of these requirements. The austenitic stainless steels not only maintain their toughness and ductility, but they also increase in yield and tensile strengths as temperatures decrease. By choosing the right austenitic stainless steel, the demands of many cryogenic temperature applications can be satisfied.

The familiar type 300 series austenitic stainless steels have been used satisfactorily for many years as materials of construction for liquid oxygen tanks and accessories as well as liquid hydrogen handling equipment. Other applications include components containing liquid carbon dioxide, acetylene, methane, argon and nitrogen. Hence, service temperatures ranging from -80°F to -320°F (-62°F to -196°F) are typical based on the boiling points of these liquids.

Type 201 austenitic stainless steel has been available for over 50 years and has gained acceptance in a number of applications. Compared to the 300 series alloys, the lower-nickel 200 series alloys offer an economical way to obtain superior mechanical properties. ATI Allegheny Ludlum has created a special composition of type 201 specifically for sub-zero temperature service as welded tanks and vessels. This alloy, designated ATI 201LN, also identified by the Unified Numbering System Designation S20153, has replaced familiar 300 series stainlesses such as type 301 or type 304 in many applications based upon technical equivalency and economic considerations. Consequently, ATI 201LN alloy is often a good choice for use at temperatures down to -320°F (-196°F).

ATI 201LN alloy is also suited for many ambient temperature structural applications, such as railroad freight cars, truck trailers, coal handling and other bulk transport equipment where there is a need for a good combination of corrosion resistance, strength, toughness and ease of fabrication.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Allegheny Technologies Incorporated 产品展示 种类
ATI Steel ATI 316L™ Steel
ATI Steel ATI 13-8 (Bar & Billet) Steel
ATI Steel ATI A286™ (Sheet, Plate, & Strip) Steel
ATI Steel ATI 304L™ Steel
ATI Steel ATI 439 HP™ Steel
ATI Steel JS700® Steel
ATI Steel ATI 219™ Steel
ATI Steel ATI 800H™ Steel
ATI Steel ATI 304™ Steel
ATI Steel ATI 455™ Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved