Addisil™ 6300

牌号Addisil™ 6300
厂家Momentive Performance Materials Inc.
分类硅酮
介绍Addisil 6300 silicone coating is a one-component heat curable silicone coating, which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.

Addisil 6300 is a white, flowable material, which can be applied on a textile by knife over roll.

Compliance with FDA regulations

Key Features and Benefits
  • One component product - no mixing required
  • Room temperature storage
  • Fast cure at elevated temperature (in a range of 140 °C to 230 °C)
  • Primerless adhesion to many types of substrates
  • No formation of cure by-products
  • Non-corrosive to metals
  • Good performance over a wide temperature range
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Momentive Performance Materials Inc. 产品展示 种类
InvisiSil™ IVS4542 硅酮
SilTRUST® TSE3661 硅酮
Silopren® Electro 170 硅酮
Tufel® II 94206 硅酮
Tufel® II 94205 硅酮
Tufel® II 94706 硅酮
Tufel® II 94406 硅酮
SilTRUST® TSE3667 硅酮
Silopren® HV 6/600 硅酮
Tufel® III 92506 硅酮

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved