Atmer™ 7540

牌号Atmer™ 7540
厂家Croda Polymer Additives
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Atmer 7540 is a 40% concentrate of IncroMax 100 in PET. IncroMax 100 is a unique additive for PET that reduces friction on the polymer surface at very low addition levels. This leads to a range of product and efficiency improvements, such as improved packing and de-nesting, reduced scuff and scratch, and 60% reduction in mold release force. It can be used to improve product quality and process efficiency in PET film, sheet and injection moulding. Suitable for use in other polyesters assuming the process temperature is high enough to ensure melting and dispersion.

Mode of action
  • Using Atmer 7540 gives better dispersion and overcomes complications that can be encountered when using IncroMax 100 in it's natural physical form. In the melt phase, Atmer 7540 ensures IncroMax 100 (the active ingredient) is evenly ditributed throughout the polymer. During cooling, the molecules migrate to the surface forming a thin lubricating layer. The IncroMax 100 layer reduces the CoF between surfaces and prevents any unwanted adhesion.

Feature and benefits
  • Most effective way of dosing IncroMax 100
  • Better distribution of additives in the base polymer
  • Improves the packing and de-nesting of preforms
  • Decreases surface friction and mold release force by 60%
  • Reduces scratch and scuff and enhances surface quality
  • Easier processing and reduced manufacturing noise
  • No adverse effect on the physical properties of the polymer

Functions
  • Mold release
  • Scuff resistance
  • Slip
  • Torque release

Guidelines for use
  • Atmer 7540 is incorporated into the polymer during processing. Experience has shown that simple manual mixing will normally give an acceptable dispersion, though mechanical means are preferred.
  • Typical addition levels are 0.25 - 1.25% in injection molding and sheet extrusion.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Croda Polymer Additives 产品展示 种类
Crodamide™ OR Slip Agent / Lubricant / Mold Release / Processing Aid
Incroflo™ 1300 Slip Agent / Lubricant / Mold Release / Processing Aid
Incroslip™ SL Slip Agent / Lubricant / Mold Release / Processing Aid
Crodamide™ 203 Slip Agent / Lubricant / Mold Release / Processing Aid
Crodamide™ 212 Slip Agent / Lubricant / Mold Release / Processing Aid
Atmer™ 7650 Slip Agent / Lubricant / Mold Release / Processing Aid
IncroMold™ K Slip Agent / Lubricant / Mold Release / Processing Aid
Incroflo™ 1100 Slip Agent / Lubricant / Mold Release / Processing Aid
Crodamide™ VRX Slip Agent / Lubricant / Mold Release / Processing Aid
IncroMold™ T Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved