CAB-O-SIL® TS-610

牌号CAB-O-SIL® TS-610
厂家Cabot Corporation
分类Silicon Based Compound
介绍CAB-O-SIL® TS-610 is a low surface area fumed silica which has been surface modified with dimethyldichlorosilane. The treatment replaces some of the hydroxyls on the surface of the silica resulting in increased hydrophobicity and very different performance than untreated silica.

TS-610 is characterized by:
  • High purity
  • Aggregate structure
  • Submicron particle size
  • Low bulk density
  • Hydrophobic surface chemistry

CAB-O-SIL TS-610 is used primarily for rheology control in non-polar to medium polarity inks, coatings and adhesives and free-flow additive for powder systems.
Ink, Coating and Adhesive Systems:

Like an untreated fumed silica the mechanism for thickening is hydrogen bonding between hydroxyl groups so TS-610 can be an effective thickener of non-polar to medium polarity systems. Although thickening potential is lower than an untreated fumed silica of equal base silica surface area, the different thixotropic response of TS-610 can provide better flow and leveling.
Powders:

The hydrophobicity surface of TS-610 has lower capacity to adsorb moisture than an untreated fumed silica of equivalent base silica surface area. Therefore, TS-610 will introduce and adsorb less moisture when used as a free-flow additive in powder systems. TS-610 is an effective free-flow additive for powder systems that are moisture sensitive. In high humidity and temperature storage conditions, powder systems incorporating TS-610 will not have reduced caking and lumping.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Cabot Corporation 产品展示 种类
CAB-O-SIL® DURAMOLD™ 2150 Silicon Based Compound
CAB-O-SIL® HP-60 Silicon Based Compound
CAB-O-SIL® M-5 Silicon Based Compound
CAB-O-SIL® EL-1000 Silicon Based Compound
CAB-O-SIL® M-7D Silicon Based Compound
CAB-O-SIL® PTG Silicon Based Compound
CAB-O-SIL® MS-75D Silicon Based Compound
CAB-O-SIL® CLARUS 3160 Fumed Silica Silicon Based Compound
CAB-O-SIL® S-17D Silicon Based Compound
CAB-O-SIL® LM-150 Silicon Based Compound

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved