Crucible Industries LLC. 416R

牌号Crucible Industries LLC. 416R
厂家Crucible Industries LLC.
分类Steel
介绍Crucible 416R is a pre-hardened chromium stainless steel which is suitable for use in precision match-grade rifle barrels. It can be supplied in various hardness ranges according to your specific requirements ( HRC 24/28, 28/32, or 32/36). Crucible 416R was specifically designed by Crucible engineers in collaboration with barrel makers and rifle manufacturers to provide consistency, high quality and the following characteristics:
1) Good machinability for gun drilling and reaming, plus excellent polish ability for uniform lapping, necessary for bore accuracy.
2) A homogeneous microstructure which responds to heat treat providing a uniform hardness along the length of the bar, necessary for accurate button rifling to precise groove dimensions.
3) An optimum combination of high tensile strength along with adequate toughness to withstand the typical chamber pressures encountered during firing.
4) Good corrosion resistance to inhibit rusting and which also helps to minimize fouling. Crucible 416R provides a durable finish which does not pit when properly maintained.
5) Precision straightened and stress relieved bars, either mill length or mult length, ready to be cut to length and gun drilled.
6) 100% ultrasonic testing for reliable barrels.

Crucible 416R stainless steel is manufactured using very stringent controls from initial melting, through hot rolling, heat treating, cold finishing and final bar inspection. Barrels made from Crucible 416R are used at all levels of competition and in all conditions dry, damp or salty. Although all martensitic stainless steels have reduced ductility at very low temperatures, Crucible 416R can be safely used down to minus 40°F (-40°C).

For more than 25 years, Crucible 416R, produced in Syracuse, NY, has been the choice of custom barrelmakers and champion shooters.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Crucible Industries LLC. 产品展示 种类
Crucible Industries LLC. 303 PLUS Steel
CPM® Rex® 76 (HS) Steel
CPM® S30V® Steel
Crucible Industries LLC. 430 Steel
Crucible Industries LLC. 154 CM Steel
Crucible Industries LLC. 422 Steel
CPM® S35VN™ Steel
CPM® Rex® 86 Steel
CPM® Rex® 54 (HS) Steel
Crucible Industries LLC. 416 Plus Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved