牌号 | Dyneon™ FLUOROELASTOMER FC 2178 |
厂家 | 3M Advanced Materials Division |
分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
介绍 | 3M™ Dyneon™ Fluoroelastomer FC 2178 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2178 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
3M Advanced Materials Division 产品展示 | 种类 |
---|---|
Dyneon™ FLUOROELASTOMER FC 2176 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ POLYMER ADDITIVE PA 5959 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ POLYMER ADDITIVE PA 5951 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FX 3735 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 5060GZ | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FT 2350 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 9207Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5929 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 5033Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ Micropowder J24 | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明