| 牌号 | Dyneon™ FLUOROELASTOMER FC 2179 |
| 厂家 | 3M Advanced Materials Division |
| 分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| 介绍 | 3M™ Dyneon™ Fluoroelastomer FC 2179 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2179 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| 3M Advanced Materials Division 产品展示 | 种类 |
|---|---|
| Dyneon™ PTFE TF 5060GZ | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ Micropowder J24 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ TFM™ 1705 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2121 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 9205 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| DYNAMAR™ POLYMER PROCESSING ADDITIVE FX 5917 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2123 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| DYNAMAR™ Polymer Processing Additive FX 5920A | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FT 2320 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FPO 3630 | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明
