| 牌号 | Dyneon™ FLUOROELASTOMER FE 5623 |
| 厂家 | 3M Advanced Materials Division |
| 分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| 介绍 | 3M™ Dyneon™ Fluoroelastomer FE 5623 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FE 5623 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| 3M Advanced Materials Division 产品展示 | 种类 |
|---|---|
| Dyneon™ FLUOROELASTOMER FX 9194 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ TFM™ 1705 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FE 5840Q | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FPO 3630 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| DYNAMAR™ Polymer Processing Additive FX 5914 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 1620 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 1641 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 2072Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER MIP 8780 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ POLYMER ADDITIVE PA 5951 | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明
