EnduraMet® 33 Stainless

牌号EnduraMet® 33 Stainless
厂家Carpenter Technology Corporation
分类Steel
介绍EnduraMet® 33 stainless is a high-manganese, nitrogen-strengthened austenitic stainless steel that provides substantially higher yield and tensile strengths than Type 304 and has general-corrosion resistance between that of Type 430 and Type 304 stainless. The corrosion resistance of EnduraMet 33 approaches that of Type 304 in some environments. It can be welded, machined and cold worked using the same equipment and methods used for the conventional 300 series austenitic stainless steels. The alloy is nonmagnetic in the annealed condition and remains nonmagnetic after cold working to high-strength levels. EnduraMet 33 provides an excellent combination of toughness, ductility, strength, corrosion resistance and fabricability.

In the hot rolled unannealed condition, yield strengths of 75 ksi (518 MPa) or higher can be achieved for bar diameters up to 1.375 in (34.925 mm).


Applications:
Rebar has been a primary application for EnduraMet 33 stainless. Specific rebar applications have included bridge decks, barrier and retaining walls, anchoring systems, chemical plant infrastructure, coastal piers and wharves, bridge parapets, sidewalks, and bridge pilings. Because of its low magnetic permeability, EnduraMet 33 has been used in concrete rebar applications in close proximity to sensitive electronic devices and magnetic resonance medical equipment. The higher strength capability, 75 ksi (518 MPa) minimum yield strength, of EnduraMet 33 is an added economical advantage.

EnduraMet 33 stainless has been used for applications where corrosion resistance approaching Type 304 is adequate but where the strength or magnetic permeability to Type 304, after cold working, is unsuitable. EnduraMet 33 has been used in such applications as weld studs, self-tapping screws, industrial screens, springs, wire products, antenna, cables, pole line hardware, worm screws, and pump shafts.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Carpenter Technology Corporation 产品展示 种类
Carpenter® CTS® B75P Alloy Steel
PremoMet® Alloy Steel
Carpenter 303Al Modified stainless Steel
Carpenter Stainless Type 348 Steel
Micro-Melt® A11 Tool Steel Steel
Hampden Tool Steel Steel
Carpenter 20Cb-3® Stainless Steel
Micro-Melt® A11-LVC Tool Steel Steel
Extendo-Die® Hot Work Die Steel Steel
Project 70+® 15Cr-5Ni Stainless Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved