KETTLITZ Haftolat

牌号KETTLITZ Haftolat
厂家Kettlitz-Chemie GmbH & Co. KG
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Haftolat or the dry form, Haftolat/P, is very effective process aids produced from EPM rubber. Independent of the polymer, they should be used where difficult rubber compounds are to be processed. Haftolat and Haftolat/P work as internal lubricants and give excellent results even at small dosage.

Due to our knowledge we recommend a dosage of 1-2 % of Haftolat or Haftolat/P calculated on the total rubber compound, to achieve the best results. Excellent results will be obtained especially in rubber compounds with high shore hardness intended to be cured in injection molding systems or having generally difficult rubber compound flow.

Haftolat and Haftolat/P can lower the mixing temperature of compounds and prevent heat buildup which is very important for chloroprene compounds. The compound flow of over-stored or slightly scorched rubber compounds based on chloroprene can be improved by the addition of Haftolat or Haftolat/P. The use of 1 % Haftolat resp. Haftolat/P can reduce the mixing temperature up to 15 °C.

Very good results are obtained with Haftolat or Haftolat/P in the production of sulfur master batches where it acts as dispersing agent for the sulfur. Haftolat or Haftolat/P is neutral and does not have any influence on curing, neither with sulfur nor peroxides. Rubber-metal-bondings are also not affected by Haftolat or Haftolat/P. Injection times, of high volume rubber parts, will be reduced especially.

With the exception of silicone rubber, the compatibility with all other rubber types is good. In EPDM compounds it is not possible to identify Haftolat or Haftolat/P by IR spectroscopy.

For general use we recommend the dry liquid product Haftolat/P because it I easier to handle.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Kettlitz-Chemie GmbH & Co. KG 产品展示 种类
Antitack BTO-15 Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran M Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Talcubex Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator OX Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-36 Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator FL plus Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator FL Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator DS Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-31 LF Slip Agent / Lubricant / Mold Release / Processing Aid
Kezadol GR Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved