KnightCote® Wire Coating
| 牌号 | KnightCote® Wire Coating |
| 厂家 | Carpenter Technology Corporation |
| 分类 | Steel |
| 介绍 | KnightCote® wire coating is a relatively thin, uniformly applied coating that can be applied to heading-grade wire. KnightCote coating prevents metal-to-metal contact, provides protection against die wear, and prevents seizure, scoring, galling and welding of parts. It is applied by a proprietary process that results in minimal variation of thickness within or between coils. This coating can withstand high-impact forces, severe upsetting and extrusion and warm heading. It can be applied to all heading alloys and on either bare or copper-coated wire. It can be used in higher temperature applications than typical molybdenum disulfide-type coatings. It is a solid film that does not deteriorate, is not hygroscopic, exhibits long shelf life and is thermally stable. Carpenter undertook the development of KnightCote coating in response to several needs in the heading industry. The most important of these was the ecological problem associated with the removal of copper coatings and the disposal of the resultant spent acid. It was apparent that a coating was needed that would replace copper, while offering similar or superior lubricating properties. The six criteria established by Carpenter for a suitable heading lubricant were: 1. Easy to apply and control. 2. Exhibits excellent extrudability and cold headability. 3. Relatively easy to remove following fabrication. 4. Stable and exhibits good shelf life. 5. Components are nonpolluting and nontoxic. 6. Thermally stable and suitable for warm/hot heading. Removal: KnightCote coating can be removed by placing the fabricated parts into dilute hot alkaline cleaning solutions (0.2 lb./gal.) at temperatures from 160 to 190°F. Immersion times of four to eight minutes without agitation are sufficient to loosen the coating from the metal surface. Only a portion of the coating is actually removed by stationary treatments, but the balance of the coating can be readily removed by rinsing the parts with water. There are advantages in time savings and removal efficiency if some form of motion during the cleaning operation is employed, such as agitators, vibratory baskets, tumblers, and ultrasonic or circulating solutions. For certain applications, some customers prefer to have the dual coatings of copper and KnightCote as an overcoat on their raw materials. The practice used in removing the copper remnants from fabricated parts (dilute nitric acid digestion) should be effective in simultaneously removing copper and KnightCote coating. The coatings could also be separately removed by initially immersing the parts into an alkaline cleaning solution followed by exposure to nitric acid. Toxicology & Disposal: The ingredients of KnightCote coating are nontoxic and nonpolluting, and there are no known regulations governing the disposal of the components. The limiting disposal factor may be the cleaning solutions containing the components. Availability: From the mill, the heading wire can be supplied as KnightCote coated and cold drawn to finish size in either soaps or oils or dry. Coils can also be supplied as KnightCote coated without final cold drawing. Applications: KnightCote coating has been used to produce a variety of fasteners requiring different degrees of upsetting and extrusion. It has been successfully used on numerous stainless grades and high temperature alloys. Most heading shops use lubrication on the wire entering the heading machine as well as lubrication within the machine. KightCote coated wire has been found to be compatible with soaps and oils used in these operations. Highly alkaline conditions in this respect should be avoided since they may adversely affect total lubricity. |
在线客服: 
申请技术报告方式
可通过以下我公司客服QQ，索要技术报告
| 客服1： |
客服2： |
| Carpenter Technology Corporation 产品展示 | 种类 |
|---|---|
| Speed Star® High Speed Steel | Steel |
| Carpenter® CTS® B75P Alloy | Steel |
| NiMark® Alloy 300 | Steel |
| Carpenter 15Cr-5Ni | Steel |
| Project 70+® Type 416 Stainless | Steel |
| Pyrotool® Alloy A | Steel |
| Carpenter Stainless Type 416BQ (No. 5 BQ) | Steel |
| Carpenter Stainless Type 440A | Steel |
| Carpenter Stainless Type 430 | Steel |
| Project 70+® Type 303 Stainless | Steel |
订购说明
上海松翰塑化科技有限公司订货流程
【订购导引】
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是客服QQ与我联系！
【物流说明】
自接到贵司订购单24小时内发货，珠三角，长三角，北京，天津均支持代收货款。货物送达后，请第一时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与我司客服部取得联系。
【订购流程】
【退换货处理】
退货：
依照中华人民共和国消费者保护法规，在您收到货品7天内，若发现您收到的商品有瑕疵或损坏，您可以要求退货，请主动与本公
司联络，敝公司接到您的商品之后，会将您的购物金额全额退回。
换货：
若您收到的商品有瑕疵或损坏，请您于7天内与本公司联络，本公司有专人处理换货事宜。
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是客服QQ与我联系！
【物流说明】
自接到贵司订购单24小时内发货，珠三角，长三角，北京，天津均支持代收货款。货物送达后，请第一时间检查外包装，如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与我司客服部取得联系。
【订购流程】
【退换货处理】
退货：
依照中华人民共和国消费者保护法规，在您收到货品7天内，若发现您收到的商品有瑕疵或损坏，您可以要求退货，请主动与本公
司联络，敝公司接到您的商品之后，会将您的购物金额全额退回。
换货：
若您收到的商品有瑕疵或损坏，请您于7天内与本公司联络，本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved