Outokumpu 1.4318

牌号Outokumpu 1.4318
厂家Outokumpu
分类Steel
介绍Austenitic stainless steel
Type X2CrNiN18-7 stainless steel: EN 1.4318, AISI 301LN, low carbon, high nitrogen

Applications
  • Generally used for structural parts where high strength and toughness are needed beside a corrosion resistance similar to grade 1.4301 / AISI 304.
  • When hardened by cold working (surface finish 2H or TR), the strength and corrosion resistance of this steel grade steel is utilized in structural applications, like in transportation vehicles.
  • The combination between ductility and toughness is excellent even at low temperatures.

Welding
  • Weldability is good. The thermal expansion is 1,5-times larger compared with carbon steels.
  • Chromium and nickel contents of the filler metal have to match or to be higher than the composition of the base metal, e.g. type 19-9.
  • Cleaning the weld seam has a significant importance for corrosion resistance. Pickling is recommended.

Forming and machining
  • Work hardening is pronounced due to high work hardening rate and formation of martensite in the range of larger deformations.
  • Formability is good, thus forces needed and the elastic return is bigger compared with carbon steels and even when compared with grade 1.4301 / AISI 304.
  • Because of high ductility and work hardening it is recommended to use sharp cutting tools and an effective cooling and adequate feed of tool when machined.

Corrosion resistance
  • Corrosion resistance is comparable to grade 1.4301 / AISI 304.
  • Resistance to atmospheric corrosion is adequate for several applications. Special attention should be paid on surface finish and regular cleaning procedures in marine and industrial environments.
  • In chloride containing solutions pitting and crevice corrosion is possible depending on various parameters like chloride concentration, temperature, pH value, redox potential, crevice geometry and others.
  • When the temperature of chloride containing solutions exceeds 50°C and the construction is loaded, stress corrosion cracking is possible.
  • The best material performance is reached usually with the help of adequate design, correct post-weld treatment and regular cleaning during use (if applicable).
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Outokumpu 产品展示 种类
Outokumpu 4311 Steel
Outokumpu 2507 Steel
Outokumpu 4306 Steel
Crofer® 22 APU Steel
Outokumpu 4016 Steel
Outokumpu 1.4510 Steel
Outokumpu 4512 Steel
Outokumpu 4401 Steel
Outokumpu 654 SMO® Steel
Outokumpu 4541 Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved