Outokumpu 1.4509

牌号Outokumpu 1.4509
厂家Outokumpu
分类Steel
介绍Ferritic dual-stabilized stainless steel
Type X2CrTiNb18 stainless steel: EN 1.4509, UNS S43940, "AISI 441"
  • Stabilized both with titanium and niobium (columbium)

Applications
  • Tubular products for automotive industry and for process equipment like heat exchangers are the main application areas.
  • This material is used also in architectural applications, like elevators and door frames. Additionally, various structures in catering and household are among the application areas.
  • High chromium content makes this grade well suited for some selected applications for replacing standard austenitic grades.

Welding
  • Conventional welding methods and filler materials applied to austenitic 300-series can be used. Heat input in welding should been kept in a minimum level.
  • Generally welded structures show lower ductility compared to that of base material.

Forming and machining
  • Grade 1.4509 can be formed using typical forming processes like folding, bending, drawing, etc.
  • It has slightly higher proof strength than standard austenitic stainless steel grade 1.4301 / AISI 304 in combination with lower work hardening.
  • Due to the titanium stabilization, its r-value is higher compared to non-stabilized ferritic stainless steel.
  • These characteristics means excellent deep-drawability.

Corrosion resistance
  • Outokumpu produces grade 1.4509 typically with a chromium content of about 18 wt-%.
  • Titanium and niobium alloying reduces sensitivity for intergranular corrosion.
  • Relatively high chromium content improves resistance to crevice corrosion that is better when compared to some other ferritic stainless steels, like 1.4016.
  • Oxidation resistance is good up to 950°C.
  • In chloride containing environments pitting and crevice corrosion is possible depending on various parameters like chloride concentration, temperature, pH value, redox potential, crevice geometry and others.
  • The best material performance is reached usually with the help of adequate design, correct post-weld treatment and regular cleaning during use (if applicable).
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Outokumpu 产品展示 种类
Outokumpu 4510 Steel
Outokumpu 4833 Steel
Outokumpu 4436 Steel
Outokumpu 4713 Steel
Outokumpu LDX 2404™ Steel
Outokumpu 4318 Steel
Outokumpu 904L Steel
Outokumpu 4512 Steel
Outokumpu LDX 2404™ Steel
Outokumpu 4406 Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved