Outokumpu 1.4510

牌号Outokumpu 1.4510
厂家Outokumpu
分类Steel
介绍Ferritic stabilized stainless steel
Type 17Cr-Ti stainless steel: EN 1.4510, AISI 439

Applications
  • Automotive exhaust system parts: mufflers, pipes, catalytic converters, support parts.
  • Domestic appliance internal parts

Welding
  • Conventional welding methods are applicable, austenitic 308L and ferritic 430LNb or 439 filler metals can be used.
  • Austenitic filler metal will result in more a ductile weld.
  • Ferritic filler metals are recommended to use in sulphuric environments and under thermal stresses.
  • Shielding gases should be based on Ar/He, mixed with maximum of 2 % oxygen or carbon dioxide to improve the arc stability. Hydrogen and nitrogen additions are forbidden.
  • Heat input should be minimized to reduce the grain coarsening effect in the heat-affected zone.
  • Titanium stabilization prevents sensitization effect in the heat-affected zone.
  • Adequate corrosion resistance in the welded joint is achieved using either mechanical descaling or pickling.

Fabrication
  • Grade 1.4510 can be formed using typical forming processes like folding, bending, drawing, etc.
  • It has higher minimum proof strength than standard austenitic stainless steel grade 1.4301 / AISI 304 in combination with lower work hardening behavior.
  • Due to the stabilization, the r-value is higher compared to the non-stabilized ferritic stainless steel such as 1.4016.
  • These characteristics mean excellent deep-drawability and other forming related properties.

Corrosion resistance
  • Outokumpu produces grade 1.4510 with a typical chromium content of 17 wt-%.
  • Titanium alloying reduces sensitivity for intergranular corrosion.
  • Oxidation resistance is good up to 950°C.
  • Relatively high chromium content improves resistance to crevice corrosion
  • Grade 1.4510 is not susceptible to chloride induced stress corrosion cracking.
  • The best material performance is reached usually with the help of adequate design and regular cleaning during use (if applicable)
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Outokumpu 产品展示 种类
Outokumpu 4311 Steel
Outokumpu 253 MA® Steel
Nicrofer® 3033 - alloy 33 Steel
Outokumpu 4404 Steel
Outokumpu 4571 Steel
Outokumpu 4845 Steel
Outokumpu 904L Steel
Outokumpu 153 MA™ Steel
Outokumpu 4509 Steel
Outokumpu 4828 Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved