STRUKTOL® A 50

牌号STRUKTOL® A 50
厂家Struktol
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍COMPOSITION
  • Zinc soaps of unsaturated fatty acids

RECOMMENDATIONS FOR APPLICATION
  • STRUKTOL® A 50 is the latest in a series of process additives developed by Struktol which are zinc fatty acid derivatives. These zinc salts have proven effective over the years as physical peptizers for natural rubber. Since the available double bonds act to stabilize free radical formation, products such as STRUKTOL® A 50 improve reversion resistance and produce vulcanizates which display greater resilience and tear strength. Because of the higher level of solubility, STRUKTOL® A 50 can be used without fear of bloom or adverse effect on rubber to metal or rubber to-rubber adhesion. Due to the polymer chain lubricating effect, compounds containing STRUKTOL® A 50 will display lower viscosities under shear as well as greatly enhanced flow rates. When used as a process additive for solution SBR, compound viscosities are reduced while flow rates and reversion resistance are improved.
  • STRUKTOL® A 50 will also provide easier mixing and extrusion of compounds based on solution SBR. Mold flow and mill roll release will also be enhanced.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Struktol 产品展示 种类
STRUKTOL® PE(O)-600 Slip Agent / Lubricant / Mold Release / Processing Aid
STRUKTOL® V-SSE Slip Agent / Lubricant / Mold Release / Processing Aid
STRUKTOL® TR 229 Slip Agent / Lubricant / Mold Release / Processing Aid
STRUKTOL® HT 105A Slip Agent / Lubricant / Mold Release / Processing Aid
STRUKTOL® A 82 Slip Agent / Lubricant / Mold Release / Processing Aid
STRUKTOL® VLB-602 Slip Agent / Lubricant / Mold Release / Processing Aid
STRUKTOL® CALCIUM STEARATE GR Slip Agent / Lubricant / Mold Release / Processing Aid
STRUKTOL® VLB-618 Slip Agent / Lubricant / Mold Release / Processing Aid
STRUKTOL® TR 251 Slip Agent / Lubricant / Mold Release / Processing Aid
STRUKTOL® TR 063A Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved