Component - Plastics		E151722
BOYD CORP
600 S Mcclure Rd, Modesto CA 95357-0520
BC00675 (n), BC01433 (n), B41N (n), BC1215757 (n)
Nitrile Rubber/Polyvinylchloride/Neoprene(NBR/PVC/CR), closed-cell foam, "Ensolite", furnished as profiles, tubes or sheets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
BK	1.3	HF-1	-	-	50	-	50
	11.7	V-0	-	-	50	-	50
	12.5	V-0	-	-	50	-	50
	12.5	HF-1	-	-	50	-	50

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm):	-
High-Voltage Arc Tracking Rate (HVTR):	-	High Volt, Low Current Arc Resis (D495):	-
Dimensional Stability (%):	-

(n) -

Density range 0.063 - 0.074 g/cc w/o skin and 0.077 - 0.156 g/cc w/ skin

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 2013-05-21 Last Revised: 2013-05-21

© 2015 UL LLC

IEC and ISO Test Methods
Test Name	Test Method	Units	Thk (mm)	Value
Flammability	ISO 9772, IEC 60695-11-10	Class (color)	1.3	HF-1 (BK)
			11.7	V-0 (BK)
			12.5	V-0 (BK)
			12.5	HF-1 (BK)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-