Component - Plastics		E256266
ITW ELECTRONICS COMPONENTS/ PRODUCTS (SHANGHAI) CO LTD
BLDG 5, XINZHUANG INDUSTRIAL PARK, 789 SHENFU RD, SHANGHAI 201108 CN
Formex CND-(b)(d)(e)
Polycarbonate (PC), furnished as Multiple Layers of Sheets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
NC, BK	0.16	VTM-0	4	1	80	80	80
	0.19	VTM-0	4	1	80	80	80
	0.25	VTM-0	4	1	80	80	80

Comparative Tracking Index (CTI):	3	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	42	Volume Resistivity (10x ohm-cm):	16
High-Voltage Arc Tracking Rate (HVTR):	1	High Volt, Low Current Arc Resis (D495):	-
Dimensional Stability (%):	-

(b) -	One to two digit suffix indicating nominal thickness in mils (7~10 mils)
(d) -	May have additional suffix letter(s) indicating color.
(e) -	Meets the requirements for IEC 60950-1, IEC 61558-1 Mandrel Test at 0.16 mm, 0.19 mm and 0.25 mm thickness at 7KvAC
NOTE -	HVTR, CTI and D495 are thickness independent

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 2014-10-13 Last Revised: 2015-01-06

© 2015 UL LLC

IEC and ISO Test Methods
Test Name	Test Method	Units	Thk (mm)	Value
Flammability	ISO 9773	Class (color)	0.16	VTM-0 (NC, BK)
			0.19	VTM-0 (NC, BK)
			0.25	VTM-0 (NC, BK)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-