Component - Plastics		E257285
GUANGDONG WAYLAM ENGINEERING PLASTICS CO LTD
Haigang Town Industrial Zone, Leliu Neighbourhood Committee, Leliu Sub-District Shunde District, Foshan Guangdong 528322 CN
PA-RG305(a)
Polyamide 6/6 (PA6/6), furnished as pellets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
ALL	1.6	V-0	0	0	100	80	95
	3.2	V-0	0	0	100	85	100

Comparative Tracking Index (CTI):	2	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm):	-
High-Voltage Arc Tracking Rate (HVTR):	1	High Volt, Low Current Arc Resis (D495):	6
Dimensional Stability (%):	-

(a) -

Replaced by two digits to denote 15-40% fiberglass content

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 2010-03-31 Last Revised: 2011-08-12

© 2015 UL LLC

IEC and ISO Test Methods
Test Name	Test Method	Units	Thk (mm)	Value
Flammability	IEC 60695-11-10	Class (color)	1.6	V-0 (ALL)
			3.2	V-0 (ALL)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	1.6	960
			3.2	960
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	1.6	775
			3.2	875
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-