Component - Plastics		E329660
SHENZHEN TEESUN TECHNOLOGY CO LTD
Blk 5 Sha-Pu-Wei-Mao-Zhou Ind Zone, Songgang Town, Baoan District, Shenzhen Guangdong 518105 CN
TS-FR1365, TS-FR1363, TS-FR1360, TS-FR1362, TS-FR160Y, TS-FR1370F, TS-FR1370, TS-FR1383, TS-FR1370-32, TS-FR1383-13
Polycarbonate (PC), furnished as sheet or roll

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
NC, BK	0.05 - 0.199	VTM-0	2	-	80	80	80
	0.20 - 0.22	VTM-0	2	-	130	125	130
	0.25 - 1.65	V-0	0	-	130	125	130

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm):	-
High-Voltage Arc Tracking Rate (HVTR):	4	High Volt, Low Current Arc Resis (D495):	6
Dimensional Stability (%):	-

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 2012-05-25 Last Revised: 2015-05-21

© 2015 UL LLC

IEC and ISO Test Methods
Test Name	Test Method	Units	Thk (mm)	Value
Flammability	ISO 9773, IEC 60695-11-10	Class (color)	0.05 - 0.199	VTM-0 (NC, BK)
			0.20 - 0.22	VTM-0 (NC, BK)
			0.25 - 1.65	V-0 (NC, BK)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-