Component - Plastics		E53898
EMS-CHEMIE AG
EMS CHEMIE HOLDING, VIA INNOVATIVA 1, DOMAT/EMS 7013 CH
Grivory GV XE 5106(f1), Grivory GVL-4H V0(f1)
Polyamide (PA), glass reinforced, "Grivory", furnished as pellets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
BK	1.6	V-0,5VA	0	1	65	65	65
	3.0	V-0,5VA	0	0	65	65	65

Comparative Tracking Index (CTI):	0	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm):	-
High-Voltage Arc Tracking Rate (HVTR):	0	High Volt, Low Current Arc Resis (D495):	5
Dimensional Stability (%):	-

(f1) -

Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water Exposure and Immersion in accordance with UL 746C.

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 2012-11-22 Last Revised: 2014-11-12

© 2015 UL LLC

IEC and ISO Test Methods
Test Name	Test Method	Units	Thk (mm)	Value
Flammability	IEC 60695-11-10, IEC 60695-11-20	Class (color)	1.6	V-0,5VA (BK)
			3.0	V-0,5VA (BK)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	1.6	960
			3.0	960
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	1.6	800
			3.0	825
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	3.0	CTI600
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-