ASACLEAN™ SX

牌号ASACLEAN™ SX
厂家ASACLEAN - Sun Plastech Inc.
分类所有权
介绍SX Grade is a high-temperature purging compound for thermoplastic injection molding and extrusion machines. SX Grade is designed to maintain thermal stability at high processing temperatures while facilitating material and color changes. It is uniquely suitable for purging super-engineering resins above 570°F.

  • High Temperature
  • SX Grade is specifically formulated to maintain thermal stability at high processing temperatures.
  • Olefinic-Based

Resins Purged:
  • Exclusively used for purging super engineering resins such as PPS, PEEK, LCP, Ultem.
  • VICTREX recommends ASACLEAN high temperature grade purging compound for VICTREX® PEEK™ polymers.

Tips for purging with ASACLEAN SX Grade:
  • ASACLEAN SX should not be left idle in the machine at temperatures above 700°F (370°C) for more than 30 minutes as decomposition may occur.
  • Keep the barrel full of ASCLEAN SX at all times to prevent oxygen from entering the barrel -- excess oxygen will accelerate material decomposition/carbon formation and could potentially result in fire at the higher end of the recommended temperature range.
  • To minimize the potential of excessive smoke while purging, it is recommended that a bucket of water be kept near the machine. Place ASACLEAN purge piles in water immediately after coming back from the nozzle.
  • For nozzle hang-up or check ring cleaning (carbon and/or color deposits), please contact your technical sales representative for special instructions.
  • If processing temperatures are at or near the maximum recommended temperature for the SX Grade, low to medium back pressure and screw speed are recommended .

Applications:
  • Color Changes
  • Material Changes
  • High Temperature Resins

Processing temperature:
  • 570 to 735°F (300 to 390°C)

Tips when using ASACLEAN:
  • ASACLEAN does not work by chemical reaction.
  • No soak time or hold-up time is required for an effective purge
  • For maximum performance, ASACLEAN should not be diluted with other materials.
  • ASACLEAN works best with maximum agitation. Use the maximum safe screw speed and for injection molding also use maximum safe back pressure with the screw in the most forward position.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
ASACLEAN - Sun Plastech Inc. 产品展示 种类
ASACLEAN™ U 所有权
ASACLEAN™ NewM 所有权
ASACLEAN™ UL2 所有权
ASACLEAN™ CP 所有权
ASACLEAN™ CG 所有权
ASACLEAN™ NewEX 所有权
ASACLEAN™ PT 所有权
ASACLEAN™ E 所有权
ASACLEAN™ UX 所有权
ASACLEAN™ NewE 所有权

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved