ASSAB Mirrax 40

牌号ASSAB Mirrax 40
厂家ASSAB Pacific Pte. Ltd.
分类Steel
介绍General
Mirrax 40 is a remelted stainless tool steel supplied prehardened to 40 HRC.

Mirrax 40 is produced using the electroslag remelting (ESR) process—an additional step in the steelmaking process that ensures very clean steel with low sulphur content (0.003% max.) and non-metallic inclusions. Consequently, Uddeholm Mirrax 40 is capable of being polished to a very high surface finish.

Mirrax 40 is characterized by:
  • excellent machinability
  • excellent polishability
  • excellent ductility and toughness
  • uniform hardness even in large dimensions
  • good indentation resistance
  • good corrosion resistance
These properties combine to give a steel with outstanding production performance.

The practical benefits of good corrosion resistance can be summarized as follows.
  • Lower mould maintenance cost: The surface of cavity impressions retain their original finish over an extended service life. Moulds stored or operated in humid conditions require no special protection.
  • Lower production costs: Since cooling channels are less likely to be affected by corrosion (unlike conventional mould steel), heat transfer characteristics and therefore cooling efficiency are constant throughout the mould life, ensuring consistent cycle times.

The benefit of the prehardened condition can be summarized as follows.
  • No hardening risks
  • No hardening costs
  • Time saving, e.g. no waiting for heat treatment
  • Lower tool cost (e.g. no distortion to rectify)
  • Modifications easily carried out

Applications
  • Injection moulds for both corrosive and non-corrosive plastics
  • Plastic moulding of high surface-finish products (e.g., Bezels and casings for TV and computers)
  • Blow moulding of corrosive plastics or high surface-finish transparent products (e.g. PET bottles)
  • Extrusion dies
  • Constructional parts
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
ASSAB Pacific Pte. Ltd. 产品展示 种类
ASSAB XW-42 Steel
ASSAB RoyAlloy Steel
ASSAB Dievar Steel
ASSAB ASP 23 Steel
ASSAB Calmax Steel
ASSAB 8407 Supreme Steel
ASSAB XW-5 Steel
ASSAB Unimax Steel
ASSAB 8407 2M Steel
ASSAB ASP 60 Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved