ASSAB Stavax ESR

牌号ASSAB Stavax ESR
厂家ASSAB Pacific Pte. Ltd.
分类Steel
介绍General
Stavax ESR is a premium grade stainless tool steel with the following properties:
  • good corrosion resistance
  • excellent polishability
  • good wear resistance
  • good machinability
  • good dimensional stability during heat treatment

The combination of these properties gives a steel with outstanding production performance. The practical benefits of good corrosion resistance in a plastics mould can be summarized as follows:
  • Lower mould maintenance costs: The surface of cavity impressions retain their original finish over extended running periods. Moulds stored or operated in humid conditions require no special protection.
  • Lower production costs: Since water cooling channels are unaffected by corrosion (unlike conventional mould steel), heat transfer characteristics, and therefore cooling efficiency, are constant throughout the mould life, ensuring consistent cycle times.
These benefits, coupled with the high wear resistance of Stavax ESR, offer the moulder low-maintenance, long-life moulds for the greatest overall moulding economy.

Note: Stavax ESR is produced using the Electro-Slag-Refining (ESR) technique, resulting in a very low inclusion content.

Applications
Whilst Stavax ESR is recommended for all types of moulding tools, its special properties make it particularly suitable for moulds with the following demands:
  • Corrosion/staining resistance: i.e. for moulding of corrosive materials, e.g. PVC, acetates, and for moulds subjected to humid working/storage conditions.
  • Wear resistance: i.e. for moulding abrasive/filled materials, including injection-moulded thermosetting grades. Uddeholm Stavax ESR is recommended for moulds with long production runs, e.g. disposable cutlery and containers.
  • High surface finish: i.e. for the production of optical parts, such as camera and sunglasses lenses, and for medical containers, e.g. syringes, analysis phials.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
ASSAB Pacific Pte. Ltd. 产品展示 种类
ASSAB Vanadis 4 Steel
ASSAB 618 HH Steel
ASSAB RoyAlloy Steel
ASSAB XW-10 Steel
ASSAB Vanadis 4 Extra Steel
ASSAB QRO 90 Supreme Steel
ASSAB Nimax Steel
ASSAB XW-42 Steel
ASSAB 8407 Supreme Steel
ASSAB 709M Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved