ATI Niobium ATI C103™ Alloy

牌号ATI Niobium ATI C103™ Alloy
厂家Allegheny Technologies Incorporated
分类Niobium
介绍The requirement for high-performance, lightweight space propulsion systems has prompted rapid investigation of refractory metals that are capable of withstanding high stress levels at elevated temperatures, and also have a low ductile-to-brittle transition temperature for withstanding high frequency vibrations at cryogenic temperatures. The metals which demonstrate these requirements are the Niobium based alloys. ATI C103™ Alloy was selected to satisfy initial design requirements because of its excellent fabricability. ATI C103™ Alloy is considered the most "forgiveable" Niobium alloy from the standpoint of welding and spinning. Hardware which has had as much as 600" of TIG weldments formed after welding and coating has withstood a 2T bend at -196°C (-320°F) after the unit had completed its duty cycle. Although it is considered a first generation alloy, succeeding Nb-1 Zr, ATI C103™ niobium was developed to replace the weaker alloys, but retain the desirable formability characteristics and welding properties. This Niobium-Hafnium-Titanium alloy satisfies most rocket engine applications for temperatures up to 1482°C (2700°F) because of superior mechanical properties at all temperatures. Extensive testing of coated components has shown that the reliability of Niobium has greatly reduced program costs as the components have been used for as many as ten times the duty cycle. Niobium also offers tremendous weight savings over many other rocket engine design materials. Niobium base alloys are finding wide use in most major aerospace programs in many different fabricated forms.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Allegheny Technologies Incorporated 产品展示 种类
ATI Niobium Nb-53Ti Niobium
ATI Niobium Nb-47Ti Niobium
ATI Niobium Powder (Grade 1 - 325 mesh) Niobium
ATI Niobium (Type 1) Niobium
ATI Niobium Nb-7.75Ta Niobium
ATI Niobium ATI C103™ Alloy Niobium
ATI Niobium (Type 2) Niobium
ATI Niobium Powder (Grade 1 - 60 mesh) Niobium
ATI Niobium Powder (Grade 2 - 325 mesh) Niobium
ATI Niobium ATI Nb1Zr™ Alloy (Type 3 & 4) Niobium

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved