ATI Steel ATI 321™

牌号ATI Steel ATI 321™
厂家Allegheny Technologies Incorporated
分类Steel
介绍ATI 321™ (UNS S32100), ATI 347™ (UNS S34700), and ATI 348™(UNS S34800) alloys are stabilized stainless steels which offer as their main advantage an excellent resistance to intergranular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 to 1500°F (427 to 816°C). ATI 321 alloy is stabilized against chromium carbide formation by the addition of titanium. ATI 347 and ATI 348 alloys are stabilized by the addition of columbium and tantalum. ATI 348 alloy has restricted cobalt and tantalum content for nuclear applications.

While ATI 321, ATI 347 and ATI 348 alloy continue to be employed for prolonged service in the 800 to 1500°F (427 to 816°C) temperature range, ATI 304L™alloy has supplanted these stabilized grades for applications involving only welding or short time heating. (For information on ATI 304L alloy, consult the Technical Data Sheet for ATI 304L™ alloy.)

ATI 321, ATI 347 and ATI 348 stainless steels are also advantageous for high temperature service because of their good mechanical properties. ATI 321, ATI 347 and ATI 348 stainless steels offer higher creep and stress rupture properties than ATI 304 alloy and, particularly, ATI 304L stainless which might also be considered for exposures where sensitization and intergranular corrosion are concerns. This results in higher elevated temperature allowable stresses for these stabilized alloys for ASME Boiler and Pressure Vessel Code applications. The ATI 321, ATI 347 and ATI 348 alloys have maximum use temperatures of 1500°F (816°C) for code applications as does ATI 304™ stainless, whereas ATI T304L™stainless is limited to 800°F (426°C).

The properties of ATI 348 stainless are similar to the properties of ATI 347 alloy, and according to ASTM A240 their chemical compositions are the same except for tantalum and cobalt contents.

High carbon versions of all three alloys are available. These grades have UNS designations S32109, S34709, and S34809.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Allegheny Technologies Incorporated 产品展示 种类
ATI Steel ATI K12®-MIL Steel
ATI Steel ATI 13-8 (Bar & Billet) Steel
ATI Steel AM 350® Steel
ATI Steel ATI 317L™ Steel
ATI Steel ATI 433™ Steel
ATI Steel ATI 840™ Steel
ATI Steel ATI 409HP™ (UNS S40930) Steel
ATI Steel ATI 334Mo® Steel
ATI Steel ATI 316™ Steel
ATI Steel ATI 455™ Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved