ATI Steel ATI 439 HP™

牌号ATI Steel ATI 439 HP™
厂家Allegheny Technologies Incorporated
分类Steel
介绍ATI 439™, a titanium stabilized, 18 percent chromium alloy, is also known as ASTM XM-8 and by the UNS designation S43035, is a ferritic stainless steel designed to resist corrosion in a variety of oxidizing environments from fresh water to boiling acids. It may be used in either the annealed, cold formed or as-welded condition in many applications where other stainless steel alloys such as Type 304, Type 410, Type 409 and Type 430 are used. ATI 439™ alloy may also be used in many oxidizing environments where Type 304 is considered adequate in terms of general corrosion resistance but is subject to chloride stress corrosion cracking. ATI 430 Ti™ (UNS S43036) material is essentially equivalent to type 439 (UNS S43035) material. It is used for heat exchanger tube, etc. ("430Ti" may also refer to UNS K91800, ASTM F256, a controlled expansion alloy for glass-to-metal sealing. ATI Allegheny Ludlum no longer produces the K91800 material.)

The composition of ATI 439™ stainless steel has been balanced to provide a completely ferritic structure at all temperatures, to avoid the loss of ductility after welding and to provide resistance to intergranular corrosion. Similar ferritic stainless steels such as ATI 430 and ATI 434 alloys are susceptible to brittle martensite formation after welding and to intergranular corrosion sensitivity in the as-welded condition. ATI 439™ alloy does not require annealing after welding to restore ductility or to provide intergranular corrosion resistance.

Excellent resistance to stress corrosion cracking, good weldability, high thermal conductivity and low thermal expansion characteristics make ATI 439™ stainless steel an ideal consideration for many applications. For shell and tube heat exchangers where carbon steel shells are used with ATI 439™ tubes, the close match of thermal expansion coefficients may possibly eliminate the need for an expansion joint in the heat exchanger. ATI 439™ alloy has a low cobalt content, compared to Type 304, making it an attractive consideration for nuclear applications.

When aplication temperatures are too high for ATI 409 alloy, ATI 439™ alloy provides good oxidation and corrosion resistance for many automotive exhaust system components and residential furnace primary heat exchangers.

ATI Allegheny Ludlum currently supplies only an improved formability version of this alloy, known as ATI 439HP™. This is especially beneficial for the severe tube bending required for automotive exhaust manifolds.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Allegheny Technologies Incorporated 产品展示 种类
ATI Steel ATI 13-8™ (Plate) Steel
ATI Steel ATI 201 HP™ Steel
ATI Steel ATI 332™ Steel
ATI Steel ATI 600-MIL® Steel
ATI Steel E-BRITE® Steel
ATI Steel ATI 309™ Steel
ATI Steel ATI K12®-MIL Steel
ATI Steel ATI 347™ Steel
ATI Steel AL-6XN PLUS® Steel
ATI Steel ATI 317™ Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved