Antitack BTO-30

牌号Antitack BTO-30
厂家Kettlitz-Chemie GmbH & Co. KG
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Antitack BTO-30 is a dispersion of very fine magnesium stearate. Due to its additives (detergents, anti-rust and anti-foam agents) it can be used in batch-off-systems (dip tank or spraying system) as well as for Barwell equipment. Antitack BTO-30 was developed to prevent environmental pollution caused by heavy metal ions of the usual zinc stearate dispersions. The pure magnesium stearate which is used for Antitack BTO-30 has a melting point of 135 °C, but the material which remains on the surface of treated unvulcanized rubber sheets or strips melts already at approx. 90 °C. After melting, it penetrates into the rubber compound and has no influence on physical properties or rubber-metal (or rubber-textile) bonding.

In trials we ran in our lab concerning antitack properties, Antitack BTO-30 always showed the best results, also in comparison to several products of our competitors.

Customers who already have Antitack BTO-30 in use confirmed the excellent properties of this product. The most important points they mentioned were.
  • fast drying of treated rubber parts, so that further processing and storage can follow soon
  • the surface of treated rubber parts seems to be clean even at dilution rates of 1 : 10, due to the
very fine particle size of the used magnesium stearate
  • no foaming problems
  • pollution of batch-off equipment is minimized compared to the use of „normal" antitack agents based on zinc stearate of products containing fillers (e. g. silica, chalk, bentonite)
  • very good antitack properties, and therefore high dilution rates

The fifth point has the consequence that less material is needed and this means lower costs for material and for cleaning periods.

Dilution ratio for first tests: 1:15 (Antitack BTO-30:H2O)
We propose to mix the concentrated antitack agent with water in a ratio of 1:1 first and to dilute it afterwards.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Kettlitz-Chemie GmbH & Co. KG 产品展示 种类
KETTLITZ Talcubex Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator FD Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Pertac/GR Slip Agent / Lubricant / Mold Release / Processing Aid
Activin NT Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator KB Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran SI-69/GR 50 Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Haftolat Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator FL Slip Agent / Lubricant / Mold Release / Processing Aid
TAC/GR 70 Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator DS Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved