Silanogran HVS

牌号Silanogran HVS
厂家Kettlitz-Chemie GmbH & Co. KG
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Kettlitz-Silanogran HVS is the granular form of a new vinyl silane for peroxide cured rubber compounds which contain silica, clay or aluminum hydroxide as fillers. The active silane content is 50%.

Silanes are used to improve process ability and physical properties of rubber vulcanizates. In compounds which are used for cable isolation silanes are applied as hydrophobing agent. In bright peroxide cured rubber compounds the most common used agent is tris-(2-methoxyethoxy-) vinyl silane (e. g. A-172, GF 58, VTMOEO). This silane is severely criticized because it separates methoxy ethanol (also called methyl cellosolve or methyl glycol) when reaction with the OH groups of the fillers takes place. It is said that methyl glycol may cause cancer, and therefore only 5 ppm are permitted on workmen's place. These problems may not occur if Silanogran HVS is used instead of methoxyethoxy-vinyl silanes.

A further benefit which will result from the application of Silanogran HVS is the outstanding influence on physical and electrical properties of rubber compounds. Tests in our rubber lab showed that a dosage of only 50% of the original silane quantity tris-(2-methoxyethoxy-) vinyl silane led to better values for physical properties as well as for aging properties. These results have been proved by tests of some of our customers. The possibility to reduce the silane dosage in such a significant way may also help to save money.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Kettlitz-Chemie GmbH & Co. KG 产品展示 种类
Dispergator SI/GR Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran Silanogran SI-69/GR 70 Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-31 LF Slip Agent / Lubricant / Mold Release / Processing Aid
Mediaplast 60 Slip Agent / Lubricant / Mold Release / Processing Aid
Kezadol PCI Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack NP-97/TY-40 Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator OX Slip Agent / Lubricant / Mold Release / Processing Aid
Kezadol GR Slip Agent / Lubricant / Mold Release / Processing Aid
Mediaplast EV/F Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Pertac/GR Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved