Mediaplast AT

牌号Mediaplast AT
厂家Kettlitz-Chemie GmbH & Co. KG
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Mediaplast AT is a very effective process aid to improve flow properties and to reduce the tackiness of rubber compounds regardless of the polymer used. Processing of CR and ACM compounds in particular is significantly improved by adding a small amount of Mediaplast AT. It improves the demolding properties of technical rubber parts. The sticking of uncured compounds to internal mixer, open mills and conveyer belts will be visibly diminished by the use of Mediaplast AT.

For compounds based on chloroprene, low dosages (= 1 phr) are generally sufficient because Mediaplast AT is very effective within this polymer.

In ACM and VAMAC compounds, tests have shown a significant improvement of rubber compound flow, whereas physical properties (e.g. compression set) are only slightly influenced.

Mediaplast AT is based on highly effective polar substances. Therefore it should only be used in small amounts (max. 1 phr) with low polarity polymers. A dosage of about 0.5 phr is recommended for sticky EPDM compounds with high plasticizer content.

The dosage for polar polymers should be 1-3 phr depending on the stickiness of the compound.

The melting point of the active substance of Mediaplast AT is approx. 55 °C.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Kettlitz-Chemie GmbH & Co. KG 产品展示 种类
Dispergator KB Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator FD Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack NP-97/TY-40 Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator FL Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack NP-97 Slip Agent / Lubricant / Mold Release / Processing Aid
Mediaplast AT Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran HVS Slip Agent / Lubricant / Mold Release / Processing Aid
Kezadol GR/DAB Slip Agent / Lubricant / Mold Release / Processing Aid
Kezadol GR Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Talcubex Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved