Antitack BTO-31 LF

牌号Antitack BTO-31 LF
厂家Kettlitz-Chemie GmbH & Co. KG
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Magnesium stearate dispersion of high efficiency. Due to its additives (detergents, anti-rust and anti-foam agents) it can be used in batch-off systems (dip tank or spraying system) as well as for Barwell equipment.

Antitack BTO-31 LF does not contain any heavy metal ions and can therefore replace zinc stearate dispersions to prevent environmental pollution. This antitack agent was developed considering latest ecological aspects. An independent institute stated in an official certificate a micro-biological degradability (OECD-301 c Miti-Test) of 85% within 14 days.

The pure magnesium stearate, which is used for Antitack BTO-31 LF, has a melting point of 135 °C, but the material, which remains on the surface of treated unvulcanized rubber sheets or strips, already melts at approx. 90 °C. After melting it penetrates into the rubber compound and does not influence the physical properties or rubber-metal (or rubber-textile) bonding, if recommended dilution ratios are applied. Better demolding properties of the vulcanized articles can be expected (cracking temperature of magnesium stearate > 350 °C).

This can also be expected if Antitack BTO-31 LF is used for Barwell equipment. No mold fouling or negative influence on surface quality of treated rubber parts will occur.

Antitack BTO-31 LF is also used for the treatment of profiles or hoses after extrusion to avoid sticking before and during vulcanization (e. g. in autoclaves).

Due to special additives the concentration of the dispersion can be evaluated by conductivity. Therefore the work-intensive determination of the dry residue can be nearly eliminated. When an automatic dosing system is connected to the conductimeter, a continuous running of the batch-off system at a stable concentration can be achieved.

Many well-known companies already have Antitack BTO-31 LF in use and confirmed the excellent properties of this product. The most important points they mentioned were:
  • the surface of treated rubber parts seems to be clean even at a dilution ratio of 1:10, due to the very fine particle size of the used magnesium stearate and the excellent stability of the dispersion
  • no foaming problems
  • pollution of batch-off-equipment (crusts, "stalactites") is minimized compared to the use of "normal" antitack agents based on zinc stearate or products containing fillers (e. g. silica, chalk, bentonite)
  • due to the excellent efficiency, Antitack BTO-31 LF can be used at high dilution rates. This results in lower costs for material and cleaning periods.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Kettlitz-Chemie GmbH & Co. KG 产品展示 种类
Silanogran M Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-20 Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran PV Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-15 Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-7 Slip Agent / Lubricant / Mold Release / Processing Aid
Mediaplast EV/F Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-33 Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran Silanogran SI-69/GR 70 Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-40 TP Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Talcubex Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved