Antitack BTO-15

牌号Antitack BTO-15
厂家Kettlitz-Chemie GmbH & Co. KG
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Antitack BTO-15 is an antitack agent which was developed step by step based on many years of experience in the rubber industry. It meets all the requirements of the modern rubber industry and is especially designed for the use in batch-off machines fitted with spraying or dipping systems. Antitack BTO-15 is very clean to handle and enables the users to keep production and equipment clean without any compromise on function and efficiency.

Modern detergents in combination with water-soluble polymers are responsible for the strong wetting abilities of Antitack BTO-15. The antitack agent is even suitable for compounds with a high content of plasticizers and guarantees an excellent separation of rubber batches, strips and granules. After application and evaporation of the water a very thin transparent polymer film will stay on the surface of the rubber batches, strips or granules. Up to a certain elongation, the polymer film will be flexible to ensure good separation of the rubber compounds after a long storage time or especially for rubber compounds with cold flow. Additionally Antitack BTO-15 contains a small quantity of pyrogenic silica to decrease the slipperiness of the antitack film.

Antitack BTO-15 is very economical to use. At rubber companies producing technical rubber parts by using all kinds of polymers and rubber compounds with different hardness, a dilution ratio of 1:20 (5 %) has been tested successfully, however, it is recommended to control the concentration of the antitack bath continuously. The minimum dilution rate should be 1:15. If the dosage of the antitack agent is higher than 1:15 the water-soluble polymers might create a thick layer on the batches, reversing the release effect and causing stickiness.

Due to the conductivity of the Antitack BTO-15 concentrate, the dilution ratio can be controlled by a conductivity meter. For further information please contact us.

Besides anti-rust and anti-foam agents, Antitack BTO-15 contains detergents which are 100% biologically degradable within 14 days, according to the OECD 302 B guidelines.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Kettlitz-Chemie GmbH & Co. KG 产品展示 种类
TAC/GR 70 Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran HVS Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Talcubex Slip Agent / Lubricant / Mold Release / Processing Aid
Kezadol GR/DAB Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-36 Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Haftolat/P Slip Agent / Lubricant / Mold Release / Processing Aid
Kezadol GR Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-31 LF Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran Silanogran SI-69/GR 70 Slip Agent / Lubricant / Mold Release / Processing Aid
Activin NT Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved