KETTLITZ Pertac/GR

牌号KETTLITZ Pertac/GR
厂家Kettlitz-Chemie GmbH & Co. KG
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Pertac/GR is a multifunctional process aid based on 1.2-polybutadiene converted into free-flowing granules. Compared with the formerly liquid high viscous 1.2-polybutadiene, the granular form provides better handling, weighing, dosage, incorporation and dispersion.

There are versatile possibilities to use Pertac/GR. First of all it is recommended as polymeric processing aid for all rubber compounds to improve the process ability in general. In most cases this is indicated by better rubber compound flow e. g. in injection moldings or extrusions. Rubber compounds produced with Pertac/GR might show an increased Mooney viscosity, but nevertheless, the process ability will be improved (flowing properties in the spider mold).

As cross-linkable processing aid Pertac/GR vulcanizes with the polymer by peroxide cross-linking as well as by sulfur curing systems. For this reason it does not influence the adhesion between rubber and other materials.

Pertac/GR is co-vulcanizing and therefore not extractable i. e. it has no negative influence on rubber compounds which have to be oil-, benzene- or solvent-resistant. Besides, Pertac/GR is suitable for rubber compounds which come into contact with food.

Pertac/GR is also to be used as reactive co-agent for peroxide cross-linked rubber compounds. Coagents like TAC, EDMA, BDMA, etc. can be replaced by Pertac/GR without any problems. Pertac/GR improves the level of physical properties, especially in cases where high shore hardness is requested. In most cases it is possible to reduce the compression set value.

Pertac/GR should not only be added to the rubber compound. It is recommended to subtract the selected dosage of Pertac/GR from the amount of polymer used. Especially for the very expensive HNBR (hydrogenated nitrilic rubber) a partial replacement of the polymer by Pertac/GR will be of interest. Tests indicated that the replacement of the polymer by Pertac/GR up to 15 phr not only reduces the raw material price of the rubber compound, the physical and processing properties will also be optimized.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Kettlitz-Chemie GmbH & Co. KG 产品展示 种类
Antitack NP-97/TY-40 Slip Agent / Lubricant / Mold Release / Processing Aid
Kezadol GR Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator SI/GR Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Haftolat/P Slip Agent / Lubricant / Mold Release / Processing Aid
Kezadol PCI Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator DS Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran Silanogran SI-69/GR 70 Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-7 Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran SI-69/GR 50 Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran HVS Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved