Kezadol GR

牌号Kezadol GR
厂家Kettlitz-Chemie GmbH & Co. KG
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Kezadol GR is a soft 81.5 % calcium oxide granule coated with special dispersing agents, for use as a desiccant in rubber compounds which are cured on micro-wave systems, LCM or hot air. Moisture which is present in all rubber chemicals, especially fillers, will be absorbed and the calcium oxide will change to calcium hydroxide after reaction with the moisture. This reaction will happen while storing the uncured rubber compounds.

It is also possible to use Kezadol GR as acid absorber e g. in systems containing chlorine. By reaction of HCl (hydrochloric acid) with CaO, CaCl2 is formed. Therefore the corrosive effect of HCl on metal parts (e. g. vulcanization molds) can be diminished. Kezadol GR helps to decrease the formation of nitrosamines.

Kezadol GR has a delayed action but a fast reaction. If calcium oxide powder preparations are used they react during the mixing process, and so a higher dosage is required, which has a negative effect on the physical properties of the vulcanizate. Kezadol GR is inactive during mixing but then reacts quicker than other calcium oxide preparations, permitting shorter standing time between mixing and extrusion. After mixing, the storage time of the compound should be at least six hours.

In comparison to CaO-preparations in powder form, which react already during mixing process, Kezadol GR shows clear advantages due to its desensitized form. The most important point is, that the dosage may be reduced significantly; therefore the influence of CaO on physical properties of the compound is reduced.

CaO-preparations in pasty form often get very hard after some time of storing these materials. This causes dispersion problems which will not occur if Kezadol GR is used.

Kezadol GR granules are very soft so that the use and dispersion even in very soft rubber compounds, e. g. sponge rubber, and on open mills will be fast without any problems.

One of the reasons for the softness of Kezadol GR is the fact that the dispersing agents used to produce the granules have no melting or softening point. Easy dispersion will take place immediately after addition to the compound.

The quality of the calcium oxide is important. Kezadol GR contains an extremely fine calcium oxide. Screen residue of the untreated CaO:
> 45 µm max. 0,1 %
> 150 µm max. 10 ppm

Recommended use

Kezadol GR should be used in order to prevent blisters and porosity in the following rubber processes.
  • Pressureless continuous curing systems like micro-wave, LCM, fluid beds or hot air
  • Low pressure curing in the cable industry
  • In compounds cured in heat transfer fluids
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Kettlitz-Chemie GmbH & Co. KG 产品展示 种类
Dispergator SI/GR Slip Agent / Lubricant / Mold Release / Processing Aid
TAIC 70 Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran PV Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Haftolat/P Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator FL plus Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack NP-97/TY-40 Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack NP-97 Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran HVS Slip Agent / Lubricant / Mold Release / Processing Aid
TAC/GR 70 Slip Agent / Lubricant / Mold Release / Processing Aid
TAC/GR 50 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved