BCC Resins BC 7020

牌号BCC Resins BC 7020
厂家BCC Products Inc.
分类环氧
介绍BC 7020 is a light weight two component epoxy backfill system. Unlike BC 7010, the filler portion is pre-blended into the resin and hardener components for easier handling, thus simplifying the mixing process. BC 7020 is ideally suited for foundry applications involving mold and core construction. BC 7020 features the following advantages: low cost, simple mix ratio (1 to 1 by wt.), long pot life, machinable, low shrinkage, color change to insure complete mix.

Mixing Procedure:
Combine equal parts (by weight) into a clean, dry mixing container such as a Hobart Kettle or similar vessel. Mix completely (5-10 minutes) until blue and yellow components yield a faint green uniform color. Empty mixture into mold cavity in 1 to 2 inch layers and compact (tamp) into place. NOTE: To insure adhesion between previously applied surface coat, laminate or BC 7020 backfill system, it is recommended that a thin layer of epoxy resin/hardener mixture be used prior to back filling with the BC 7020 system.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
BCC Products Inc. 产品展示 种类
BCC Resins BC 7020 环氧
BCC Resins BC 7062-3H 环氧
BCC Resins EB6200 环氧
BCC Resins BC 6004 环氧
BCC Resins BC 7069-2 环氧
BCC Resins BC 7053 环氧
BCC Resins BC 7069-1 环氧
BCC Resins BC 6126 环氧
BCC Resins BC 7062R 环氧
BCC Resins BC 7136-2 环氧

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved