牌号 | Dyneon™ FLUOROELASTOMER FC 2120 |
厂家 | 3M Advanced Materials Division |
分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
介绍 | 3M™ Dyneon™ Flouroelastomer FC 2120 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2120 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
3M Advanced Materials Division 产品展示 | 种类 |
---|---|
Dyneon™ PTFE TF 1750 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 1645 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FPO 3630 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER LTFE 6400 Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5922 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FC 2144 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FPO 3741 | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5914 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ POLYMER ADDITIVE PA 5959 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER MIP 8740 | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明