牌号 | Dyneon™ FLUOROELASTOMER FC 2181 |
厂家 | 3M Advanced Materials Division |
分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
介绍 | 3M™ Dyneon™ Fluoroelastomer FC 2181 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2181 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
3M Advanced Materials Division 产品展示 | 种类 |
---|---|
DYNAMAR™ POLYMER PROCESSING ADDITIVE FX 5917 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 9201Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FX 2530R | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FC 2230 | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5914 | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5929 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 2025Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FX 9194 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FX 3734 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER LTFE 6400 Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明