牌号 | Dyneon™ FLUOROELASTOMER FG 5690Q |
厂家 | 3M Advanced Materials Division |
分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
介绍 | 3M™ Dyneon™ Fluoroelastomer FG 5690Q can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FG 5690Q should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
3M Advanced Materials Division 产品展示 | 种类 |
---|---|
Dyneon™ PTFE TF 5033Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5927 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FPO 3630 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FC 2230 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FT 2320 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 2025Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5912 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TFM 1700 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE DISPERSION TF 5035Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 5035Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明