牌号 | Dyneon™ FLUOROELASTOMER FT 2350 |
厂家 | 3M Advanced Materials Division |
分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
介绍 | 3M™ Dyneon™ Fluoroelastomer FT 2350 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FT 2350 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
3M Advanced Materials Division 产品展示 | 种类 |
---|---|
DYNAMAR™ Polymer Processing Additive FX 5920A | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ Micropowder J14 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE DISPERSION TF 5041Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 2072Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FX 3735 | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 9613 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 5035Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5920B | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FX 2530R | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FC 2211 | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明