EOS PA 2201

牌号EOS PA 2201
厂家EOS GmbH
分类尼龙12
介绍PA 2201, a whitish, a bit more translucent polyamide 12 powder, is in compliance with FDA, 21 CFR, §177.1500 9(b) except for alcoholic foodstuff. Apart from that PA 2201 and PA 2200 have identical material properties. Laser-sintered parts made from PA 2201 possess excellent material properties:

  • high strength and stiffness
  • good chemical resistance
  • excellent long-term constant behaviour
  • high selectivity and detail resolution
  • various finishing possibilities (e.g. metallisation, stove enamelling, vibratory grinding, tub colouring, bonding, powder coating, flocking)

Typical applications of the material are fully functional plastic parts of highest quality. Due to the excellent mechanical properties the material is often used to substitute typical injection moulding plastics. The biocompatibility allows its use e.g. for prostheses, the high abrasion resistance allows e.g. the realisation of movable part connections.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
EOS GmbH 产品展示 种类
EOS PA 2210 FR 尼龙12
EOS PA 2201 尼龙12
EOS Alumide® 尼龙12
EOS PA 2200 Balance 1.0 尼龙12
EOS PA 2200 Performance 1.0 尼龙12
EOS PA 2105 尼龙12
PrimePart® PLUS PA 2221 尼龙12
EOS PA 2200 Top Quality 1.0 尼龙12
EOS PA 2241 FR 尼龙12
EOS PA 2202 black 尼龙12

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved