EOS StainlessSteel 316L

牌号EOS StainlessSteel 316L
厂家EOS GmbH
分类Steel
介绍EOS StainlessSteel 316L is a corrosion resistant iron based alloy which has been optimized especially for processing on EOSINT M280 systems.

The parts built from EOS StainlessSteel 316L have chemical composition corresponding to ASTM F138 "Standard Specification for Wrought 18Cr-14Ni-2.5Mo Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)". This kind of stainless steel is characterized having a good corrosion resistance and evidence that there are no leachable substances in cytotoxic concentrations.

Parts built from EOS StainlessSteel 316L can be machined, shot-peened and polished in as-built or stress relieved (AMS2759) states if required. Solution annealing is not necessary because the mechanical properties of as-built state are showing desired values (ASTM A403). Parts are not ideal in temperature range 427°C - 816°C where precipitation of chromium carbides occurs. Due to layer-wise building method, the parts have a certain anisotropy which could be seen from mechanical properties.

This material is ideal in:
  • Lifestyle/Consumer - watches, other jewellery, spectacle frames, decorations, functional elements in electronic housing and accessories
  • Automotive/Industrial - non-corroding common material, food and chemical plants
  • Aerospace/Turbine industry - entry-level material for Laser Sintering Technology, mounting parts, brackets, heat exchangers

Layer thickness: 20 µm

Typical achievable part accuracy:
small parts ± 20-50 µm
large parts ± 0.2%
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
EOS GmbH 产品展示 种类
EOS CarbonMide® 尼龙12
EOS Alumide® 尼龙12
EOS CobaltChrome SP2 Cobalt
EOS PEEK HP3 PAEK
PrimePart® ST PEBA 2301 TPA-ET
EOS Titanium Ti64 Titanium
EOS MaragingSteel MS1 Steel
EOS PA 2200 Speed 1.0 尼龙12
EOS PA 2202 black 尼龙12
EOS PA 1101 尼龙 11

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved