| 牌号 | EOS MaragingSteel MS1 |
| 厂家 | EOS GmbH |
| 分类 | Steel |
| 介绍 | EOS MaragingSteel MS1 is a steel powder which has been optimized especially for processing on EOSINT M systems. Parts built in EOS MaragingSteel MS1 have a chemical composition corresponding to US classification 18% Ni Maraging 300, European 1.2709 and German X3NiCoMoTi 18-9-5. This kind of steel is characterized by having very good mechanical properties, and being easily heat- treatable using a simple thermal age-hardening process to obtain excellent hardness and strength. Parts built from EOS MaragingSteel MS1 are easily machinable after the building process and can be easily post-hardened to more then 50 HRC by age-hardening at 490 °C (914 °F) for 6 hours. In both as-built and age-hardened states the parts can be machined, spark-eroded, welded, micro shot-peened, polished and coated if required. Due to the layerwise building method, the parts have a certain anisotropy, which can be reduced or removed by appropriate heat treatment - see Technical Data for examples. This document provides information and data for parts built using EOS MaragingSteel MS1 powder (EOS art.-no. 9011-0016) on the following system specifications:
Typical achievable part accuracy: small parts ± 20 µm large parts ± 50 µm |
| EOS GmbH 产品展示 | 种类 |
|---|---|
| PrimePart® ST PEBA 2301 | TPA-ET |
| EOS MaragingSteel MS1 | Steel |
| EOS PA 2200 Performance 1.0 | 尼龙12 |
| EOS Aluminium AlSi10Mg | Aluminum |
| EOS PA 2200 Top Quality 1.0 | 尼龙12 |
| EOS PEEK HP3 | PAEK |
| EOS PA 3200 GF | 尼龙12 |
| EOS CobaltChrome SP2 | Cobalt |
| EOS StainlessSteel 316L | Steel |
| EOS PA 2200 Speed 1.0 | 尼龙12 |
订购说明
