Incroflo™ 1200

牌号Incroflo™ 1200
厂家Croda Polymer Additives
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Incroflo 1200 is an internal lubricant/ processing aid for WPC from Croda. It is used to improve the productivity in a wide range of WPC formulations. The cost saving benefits of this product include increased throughput and reduced processing temperature and pressure. Final parts will exhibit better dispersion of wood and pigments which lead to superior mechanical properties and reduced water absorbtion.

Mode of action
  • Incroflo 1200 acts as an internal lubricant and allows better dispersion of the wood and plastic whilst the polymer is molten. As the system is lubricated, pressure and temperature can be reduced and optimised to give increased output rates. In injection moulding, the Incroflo will migrate to the surface to allow consistent mold release.

Feature and benefits
  • Increased throughput
  • Improved flow
  • Superior surface finish
  • Enhanced mold release
  • Reduced processing temperatures & pressures
  • Reduced machine wear.

Functions
  • Lubricants / Process aids

Guidelines for use
  • Incroflo 1200 is available as 100% active pastille, which can be dosed directly into the polymer during processing or added via a masterbatch or pre-blend.
  • Initial addition levels are typically 1 - 5%
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Croda Polymer Additives 产品展示 种类
Atmer™ 7540 Slip Agent / Lubricant / Mold Release / Processing Aid
Atmer™ 7650 Slip Agent / Lubricant / Mold Release / Processing Aid
Incroflo™ 1100 Slip Agent / Lubricant / Mold Release / Processing Aid
Incroslip™ SL Slip Agent / Lubricant / Mold Release / Processing Aid
Incroslip™ B Slip Agent / Lubricant / Mold Release / Processing Aid
Incroslip™ G Slip Agent / Lubricant / Mold Release / Processing Aid
Crodamide™ 203 Slip Agent / Lubricant / Mold Release / Processing Aid
Crodamide™ 212 Slip Agent / Lubricant / Mold Release / Processing Aid
IncroMold™ F Slip Agent / Lubricant / Mold Release / Processing Aid
Crodamide™ OR Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved