MoldX® P18

牌号MoldX® P18
厂家J.M. Huber Corporation
分类Flame Retardant
介绍MoldX® P18 is for pultrusion, resin infusion, CIPP and vacuum bag molding applications. It's particle size distribution with top size particles of less than 18 microns gives superb processing performance at fiberglass contents greater than 50% by weight.

MoldX P18 is a non-halogen, optimized ATH product designed for fiberglass reinforced polyester applications such as pultrusion, resin infusion and vacuum bag molding. MoldX P18 is engineered to have outstanding processing because the ATH particles flow easily throughout the fiberglass in the system.

An optimized particle size distribution with a small particle top size is a major advance for pultrusion. The pultruder can obtain a very low pull force at a high glass content ( >60% by weight) with a MoldX P18-based formulation especially when compared to other standard ATH products. MoldX P18 also gives a low viscosity that allows formulators to use a higher loading of ATH. Increased loading gives increased flame retardant performance and possibly elimination or reduction in the amount of more expensive fire retardant additives. Technical service is available.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
J.M. Huber Corporation 产品展示 种类
Vertex® 100 ST1 Flame Retardant
MoldX® P18 Flame Retardant
SB 30 Flame Retardant
HN 434 Flame Retardant
Onyx Elite® 95 Flame Retardant
SB 136 Flame Retardant
Zerogen® 50 SP Flame Retardant
Hydral® PGA - SD Flame Retardant
Hydral® Coat 7 Flame Retardant
Vertex® 60 Flame Retardant

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved