PIB Compound PT-60

牌号PIB Compound PT-60
厂家Polyfill Technologies Pvt. Ltd
分类Compatibilizer / Adhesion Promoter
介绍Polyfill's PIB Compound PT-60 is an average molecular Poly Isobutylene based Compound based on polyolefins. It contains the blend of Poly-Iso-Butylene & Special additive dispersed in the polymer matrix, made in the state of the art plant to give excellent performance in extreme climatic conditions.

PIB Compound is mainly used in LLDPE / LDPE self adhesive Stretch Film, Cling Film, & Wrap Film (either Blown Film or Cast Film) and it is available in granule form.

PIB Compound is available in the granule form which is very easy to handle as against the direct dosing of PIB liquid which is very difficult & tedious to handle due to high viscosity. Our PIB Compound distributes very uniformly over the entire film imparting the strength & tackiness properties to the film with self adhesive properties. And this property of the film helps to bind the packages together with proper grip. In multi-layer films, PIB Compound is used only in one layer, the upper layer and the adding ratio is determined by the film thickness and on the layer to be used.

PIB COMPOUND PT-60 is a concentrate of very high molecular weight Polyisobutylene tackifier and Linear Low Density Polyethylene. The composition is used as a cling agent to produce stretchwrap films from LLDPE or LDPE. It is dry free flowing pellets. The high PIB content in the polymer matrix achieves the excellent cling property.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Polyfill Technologies Pvt. Ltd 产品展示 种类
PIB Compound PT-60 Compatibilizer / Adhesion Promoter
POLYfill Ultra Clear Natural Slip Agent / Lubricant / Mold Release / Processing Aid
Antistatic Masterbatch PT3002 Antistatic Agent
Slip Masterbatch PT-3004 Slip Agent / Lubricant / Mold Release / Processing Aid
TiO2 White Masterbatch PT2002 Pigment
PPA Masterbatch PT3001 Slip Agent / Lubricant / Mold Release / Processing Aid
POLYfill Milky White Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved