TAIC 50

牌号TAIC 50
厂家Kettlitz-Chemie GmbH & Co. KG
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍TAIC 50 and 70 are 50% resp. 70% preparations of triallylisocyanurate (TAIC) on extremely fine silica as carrier in powder form.

TAIC can be recommended especially as co-activator for peroxide curing, when excellent physical properties are to be reached, especially very low compression-set values even after aging and under extreme conditions. TAIC has proved to be effective within all kinds of different flour elastomers, HNBR and EAM (VAMAC); it can also be used with other polymers such as EPDM/EPM, EVA etc.

Due to the very low melting point of approximately 24 C, the pure TAIC can have a solid/crystalline or even liquid form, depending on the room temperature. Therefore the handling will be considerably improved when using the 50 and 70 % Kettlitz preparation. Besides, regarding the dispersibility, the powdery preparations show much better results compared to the liquid product.

At low temperatures (below 10 C) the product tends to crystallize, and, depending on the storage conditions (temperature and time), the state of aggregation of TAIC, especially TAIC 70, may change, which leads to caking of the powder. The product will easily revert to a free-flowing powder by mechanical influence. During processing resp. mixing, when the very low melting point is reached, the agglomerates decompose immediately anyway. Consequently dispersion problems are not to be expected and caking, which might occur, does not influence the product quality negatively.

To maintain the physical form of the product, we recommend storing TAIC 50 resp. TAIC 70 at temperatures between 10 and 20 C in a well-ventilated area protected against sunlight.

As dosage of peroxide and co-activator we recommend approximately 2:1 (peroxide to TAIC 50 or 70) on a basis of 100% active substance.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Kettlitz-Chemie GmbH & Co. KG 产品展示 种类
Antitack BTO-15 Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-33 Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran PV Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator FD Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator SI/GR Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran HVS Slip Agent / Lubricant / Mold Release / Processing Aid
TAIC 50 Slip Agent / Lubricant / Mold Release / Processing Aid
Mediaplast AT Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator DS Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran VES Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved