AFCONA 3772

牌号AFCONA 3772
厂家AFCONA Additives Sdn Bhd
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Leveling and surface tension reduction agent for aqueous and non-aqueous coatings.

Product Properties:

  • AFCONA-3772 is an acrylic modified fluorocarbon. It contains some carboxylic acid groups, which increase the polarity of the polymer to give good compatibility with most common resins used in coating.
  • For use in aqueous coatings, AFCONA-3772 must be neutralized with a suitable amine.
  • Complete water solubility will be obtained by addition of 9% triethylamine or 12% ammonia solution (25% concentration).

AFCONA-3772:

  • gives no in can haziness
  • provides anti-flooding and floating
  • improves levelling
  • prevents craters and orange-peel
  • helps substrate wetting

In solvent-based coatings, other non- silicone leveling agents like AFCONA - 3770, AFCONA - 3670 and AFCONA-3777 gives better performance than AFCONA-3772. Due to it good compatibility, AFCONA - 3772 is recommended mainly for high gloss clear coatings and as anti inner bubble aid for PU coatings.

Like AFCONA - 3730, AFCONA - 3772 also have very good compatibility with most resin system. However AFCONA - 3730 is much better in leveling and AFCONA - 3772 is better in anti-crater and substrate wetting. In clear coating, to obtain all the performances mentioned, we recommended to combine these 2 additives together. For pigmented, matted and primer, we have other products like AFCONA - 3670, AFCONA - 3770 and etc that can fulfill all requirements.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
AFCONA Additives Sdn Bhd 产品展示 种类
AFCONA 3285 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3700 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3250 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3770 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3758 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3777 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3277 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3777E Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3750 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3772 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved